9,93 @ 152.6 MPH

[bjahja]

ÖSSSSSSSSS

E36 328 turbo 4 dyra alveg stock lúkking nema carbon fiber húdd og skott. 996 hestöfl Í HJÓLIN!
Fór 9,93 á 29psi

http://bmwturbo328.com/index.html

Thanks all
A big thanks to George I said I needed a trans and he delievered.
Big thanks to Lenny I blew out the diff and he rebuilt it over night for me.
There is still a traction problem spun on every run.

I spent all day Saturday and Sat night getting the trans in and changing out the Diff and putting in a lower wastegate spring.(It was alot easier with the Bimmer forum pit crew there)

First run with new spring (18 psi)I had it set to 27 but had the turbo coming on way to slow.I thought it was another 10 run. A 1.669 60ft(caution f word used)
www.bmwturbo328.com/car/998run.wmv

Happy, but wanted more I had the boost come in sooner but still 27 came in a little to strong around 1/8 started going in other lane left off got straight and hit again for the heck of it.A 1.664
www.bmwturbo328.com/car/10spinning.wmv

Ok got to be a happy medium 2 more pounds of boost 29 and bring the turbo in a little slower.Spun off line and in first to a 1.744 60ft. Ran into rev limter hard way before finish line(3.38 gears)
www.bmwturbo328.com/car/993.wmvSorry camera man was diffrent on this run.

Funny thing Stephen said dad you ran your 10.7 closing day last year
and ran your 9 closing day this year.What will you do next year...
__________________

[Svenni Tiger]

BASIC

[aronjarl]

tæpur 2ja BAR-a þrýsting hehe

það er svolítið mikið.!

Konnys er að ná 754hö á 1.5 bar á M50 borað í 2.8

[Aron Fridrik]

M52 er stálblokk í USA er það ekki ?

þannig að þetta er í raun bara útboruð m50 ?

[gunnar]

Ertu að segja mér að gæinn sé með M52B28 með álblokk??

Maður ætti kannski að fara hugsa um FI eða hvað