bmwkraftur.is

SævarM wrote:Góðan daginn er með 2 strut brace til sölu hérna fyrir E30

Verð: 25þ. stk

S:8650859

eða PM

Alpina wrote:

SævarM wrote:Góðan daginn er með 2 strut brace til sölu hérna fyrir E30

Verð: 25þ. stk

S:8650859

eða PM

Er sama vegalengd í non ix bílum .. eða er það það sama í alla E30

This Steel strut brace fits well and is very rigid yet light weight. These have NO joints or swivels and are very stiff. Color is black but these are usually available unpainted and can be easily painted to match the car. Requires drilling of two 8mm holes for best strength. Beware of flimsy thin aluminum bars most are not rigid enough to work properly. Our bar fits both 325's and M3's,but not the ix. These bars do not fit the 318 4 cyl models(either early or late). IMPORTANT--The factory book says the distance between the strut towers is 1002.2mm +-2mm (39.5"). Measured from center to center (where the shock sticks thru.) We have found many cars that measure about 980mm (38.75"). This leads us to believe BMW made two slightly different unibodies. Therefore please make sure your required strut brace is a std. due to our findings. Please specify model and year, and measure your car to specify
New development -- We now have the regular length (not the short length) available in polished STAINLESS STEEL. Please let us know if you want the polished SS version.

Mazi! wrote:Bilið á milli turna í e30 er ekki alltaf það sama


980mm og 1002.2mm

Samkvæmt Ireland Engineering.

This Steel strut brace fits well and is very rigid yet light weight. These have NO joints or swivels and are very stiff. Color is black but these are usually available unpainted and can be easily painted to match the car. Requires drilling of two 8mm holes for best strength. Beware of flimsy thin aluminum bars most are not rigid enough to work properly. Our bar fits both 325's and M3's,but not the ix. These bars do not fit the 318 4 cyl models(either early or late). IMPORTANT--The factory book says the distance between the strut towers is 1002.2mm +-2mm (39.5"). Measured from center to center (where the shock sticks thru.) We have found many cars that measure about 980mm (38.75"). This leads us to believe BMW made two slightly different unibodies. Therefore please make sure your required strut brace is a std. due to our findings. Please specify model and year, and measure your car to specify
New development -- We now have the regular length (not the short length) available in polished STAINLESS STEEL. Please let us know if you want the polished SS version.

SævarM wrote:

Mazi! wrote:Bilið á milli turna í e30 er ekki alltaf það sama


980mm og 1002.2mm

Samkvæmt Ireland Engineering.

This Steel strut brace fits well and is very rigid yet light weight. These have NO joints or swivels and are very stiff. Color is black but these are usually available unpainted and can be easily painted to match the car. Requires drilling of two 8mm holes for best strength. Beware of flimsy thin aluminum bars most are not rigid enough to work properly. Our bar fits both 325's and M3's,but not the ix. These bars do not fit the 318 4 cyl models(either early or late). IMPORTANT--The factory book says the distance between the strut towers is 1002.2mm +-2mm (39.5"). Measured from center to center (where the shock sticks thru.) We have found many cars that measure about 980mm (38.75"). This leads us to believe BMW made two slightly different unibodies. Therefore please make sure your required strut brace is a std. due to our findings. Please specify model and year, and measure your car to specify
New development -- We now have the regular length (not the short length) available in polished STAINLESS STEEL. Please let us know if you want the polished SS version.

Ég vissi af þessu en það er ekki gefið upp neinstaðar nema þarna að þetta sé mismunandi, og maður verður bara að sjá , ef svo ólíklega vill til að þetta sé svona hjá einhverjum, get ég bara reddað því.

joiS wrote:m3 ?? mig vantar allavega vega að framan, komið að aftan

joiS wrote:m3 ?? mig vantar allavega vega að framan, komið að aftan

Einarsss wrote:m3 turnarnir ættu ekki að vera neitt öðruvísi en í venjulegum e30